Converters
Metric and Imperial Unit Conversions: Exact Factors and Offsets
Reference exact 1959 yard-pound conversion factors, affine Celsius-Fahrenheit-Kelvin formulas, US vs imperial volume units, and rounding rules.
Measurement factors
Convert via SI bases and temperature offsets
Apply exact 1959 yard-pound factors and affine °C/°F/K transforms while keeping US and UK volumes distinct.
Inputs
numeric quantity, source unit, and target unit
Rule
1 in = 2.54 cm, 1 lb = 0.45359237 kg, offset for °C/°F/K
Check
US vs UK gallons and fixed vs calendar time
Linear unit conversion converts any quantity to a category's SI base unit and divides by the target unit's exact factor ((value × fromFactor) ÷ toFactor), whereas temperature conversion requires an affine offset step because Celsius, Fahrenheit, and Kelvin do not share a zero point. Use the Unit Converter inside the converters hub to compare seven unit categories simultaneously in your browser without sending entered measurements to Toolk.
Rounding an intermediate factor—such as writing 1609 m per mile instead of 1609.344 m—or mixing US customary and UK imperial gallons introduces systematic error that grows with scale.
Quick reference: exact SI base definitions
| Category | Base unit | Exact defining relationship | Source standard |
|---|---|---|---|
| Length | Metre (m) | 1 yd = 0.9144 m, 1 in = 0.0254 m, 1 mi = 1609.344 m | NIST SI Unit Conversion |
| Mass / Weight | Kilogram (kg) | 1 lb = 0.45359237 kg, 1 oz = 0.028349523125 kg | 1959 Yard & Pound Agreement |
| Volume | Litre (L) | 1 US gal = 3.785411784 L, 1 UK gal = 4.54609 L | NIST / UK Weights & Measures |
| Temperature | Celsius (°C) | °F = °C × 9/5 + 32, K = °C + 273.15 | BIPM SI Brochure |
| Area | Square metre (m²) | 1 acre = 4046.8564224 m², 1 ha = 10,000 m² | Exact squared yard/metre definition |
| Time (fixed) | Second (s) | 1 day = 86,400 s, 1 avg Gregorian yr = 31,556,952 s | SI second & mean calendar span |
Why exact 1959 factors matter over rounded shortcuts
Since the 1959 international yard-and-pound agreement documented by NIST, customary length and avoirdupois mass units are defined directly in terms of SI units rather than independent physical artifacts:
1 inch = 2.54 cm(exact):12 in = 1 ft = 0.3048 m, and5280 ft = 1 international mile = 1609.344 m. Using a rounded1609 mloses0.344 mevery mile (~34.4 mover100miles).1 pound = 0.45359237 kg(exact): Dividing by16gives1 ounce = 28.349523125 g.- US customary vs. UK imperial volume: A
US gallon(231 in³ = 3.785411784 L) is roughly16.7%smaller than animperial UK gallon(4.54609 L). Never convert cooking or fuel figures across systems without checking which gallon, pint, or cup definition applies.
For web CSS sizing units (px, em, rem) rather than physical units, compare viewport and root font-size scaling in our px vs. em vs. rem CSS guide. For positional number systems (binary, octal, decimal, hex), switch to the Number Base Converter.
Affine temperature transforms vs. temperature intervals
Temperature values require both scaling and shifting (°F = °C × 9/5 + 32, K = °C + 273.15) because 0 °C, 0 °F, and 0 K sit at different physical temperatures:
Point temperature (0 °C to Fahrenheit):
(0 × 9/5) + 32 = 32 °F
Temperature interval (a 10 °C rise in Fahrenheit):
Δ°F = 10 × (9/5) = 18 °F (do NOT add +32 to an interval)
Notice also why cross-category conversions such as metres to litres are invalid: length (L¹) and volume (L³) measure different physical dimensions and relate only through a geometric formula like cylinder volume π × r² × h.
Physical time units vs. calendar dates
The Unit Converter models fixed-length time intervals: 1 day = 86,400 s and 1 average Gregorian year = 31,556,952 s (365.2425 days). That works for physics, rates, and uptime budgets, but breaks on human birthdays, billing months, and daylight-saving transitions where local days can last 23 or 25 hours and months span 28 to 31 days.
Use the Date Difference Calculator for exact calendar spans and read the calendar dates, age, and duration guide whenever calendar rules govern your calculation.
All unit conversions execute locally in JavaScript; your measurements stay in the active browser tab, while GA4 page-view analytics never receive entered numbers. Browse additional conversion tools in the converters category.
Primary references
Keep reading
Related posts
Preparing Web Images, QR Codes, and Alt Text Audits in the Browser
Reduce image byte weight with HTMLCanvasElement, choose resilient QR code error correction, and audit missing alt attributes directly in the browser.
Read postPercentage Change, Percentage Points, and Reverse Percent Math
Compare percent of a number, percentage change, reverse tax extraction, and percentage points with exact formulas, examples, and zero-base limits.
Read postLocal PDF Workflows: Merge, Extract, Organize, and Convert
Merge documents, extract selected page ranges, rotate or reorder pages, and turn JPG or PNG scans into a PDF locally in your browser without server uploads.
Read post